Sale!

Talaria 72v 14kW RaceV2.5, KO PRO Controller + RaceV2.5 72v 42Ah

Original price was: £3,495.00.Current price is: £2,949.00. (price including VAT)

Talaria 72v 14kW RaceV2.5, KO PRO Controller + RaceV2.5 72v 42Ah

5 in stock

Category: Tag:

Description

Talaria 72v 13-16kW RaceV2, KO PRO Controller +

RaceV2 72v 42Ah Battery

Now Only Available in Blue

UK Stock, Including Shipping and Taxes

12 Months UK Warranty

CLEARANCE  SALE!!!

Shipping: UK next day (free).
EU land ship available, bank transfer only
(For EU please email: info@electroncycles.co.uk)

We dispatch within three working days.

Now with new anti rattle support!!

Massive increase in range and acceleration over standard. Perfect for long rides. Set main power  200A 480A Phase

Power etc all fully customizable through the latest KO app for iPhone and Android –  extremely easy to set up

Range is over double to a standard set up.

Controller Specifications (must not be set higher for this battery – Please check with KO for max power output for the Talaria  Motor):

Input Voltage: 40-100v
Max Phase Current 560A
Max line Current 180A
Peak Output Power 156000 Watts
Water Penetration ip67
Operating Temp -25C to 80C
Max Efficiency 98%

High Power Talaria Battery 20S10P 72v  3024Wh 42Ah Molicell p42A 21700 cell (high power 4200 mAh  per cell),  with fully monitoring charge/discharge Hybrid BMS. Battery designed to fit inside the Talaria battery compartment utilizing the existing battery tray. The Cells are genuine branded Molicell P42A 21700 cells specifically designed for high output discharge and sustained high drain. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 200 cells that retail in the UK for around £8 each! not including: BMS, fabrication and shipping taxes.

The whole battery is fitted in  hand made stainless steel 316 grade case designed to handle those inevitable and hopefully not painful “Offs” with hard off road rides and giving masses more protection. The casing is powder coated inside and out.

Specifications.

20s1op Molicell p42A 21700.
Weight 17.3KG
 BMS set at 400  Amps Peak full battery protection including over discharge (shorts) over heating etc
Each cell with additional individual wrapping for added protection.
Additional layers of fibre board, Kapcon tape, heat shrink with internal/external powder coated stainless steel sealed box to give maximum protection and insulation.
Stainless steel 316 grade powder coated case
Double sandwich configuration using 0.2mm pure welded nickle sheet.
Fully monitoring charge/discharge BMS
An integrated handle for lowering the battery in and out.
Charging port via an XT60 connector. Your existing charger WIL NOT work on the battery
Charger NOT included
You will need to purchase a charger here: https://www.electroncycles.co.uk/product/72v-84v-8a-charger-for-large-batteries-suitable-for-72v-sur-ron/
The main battery to controller connectors we use are the same type as used by Talaria to keep everything compatible. This allows you to swap your standard battery back should you wish.
Battery is in a super tough hand built stainless steel case designed to keep your battery safe in an accident and waterproof except immersion or direct jet washing at the cable exits.. Designed to fit straight into the bike and maximize the whole battery compartment (the hatch bolts need swapping  out with longer bolts that we supply – 2 minutes and simple). No movement- no rattles!
Your standard charger will not work
THIS KIT DOES NOT INCLUDE A CHARGER. Chargers can be found here (10A MAX):
https://www.electroncycles.co.uk/product/72v-84v-8a-charger-for-large-batteries-suitable-for-72v-sur-ron/

Please ALSO note, these are genuine new cells and made up into complete battery specially designed by us, built at our oversees  factory or here in the UK by our dedicated battery builders. We simply can’t buy a single battery, Thanks to Paypal fees, shipping and taxes the markup is minimal!

When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off. Connect the older original power cable and then turn the red trip to on. Then connect the new power leads. Removing battery has no special order.

Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.

The main battery to controller connectors we use are the same type as used by Talaria to keep everything compatible. This allows you to swap your standard battery back should you wish.
Battery is in a super tough hand built stainless steel case designed to keep your battery safe in an accident and waterproof  except immersion or direct jet washing at the cable exits. Designed to fit straight into the bike and maximize the whole battery compartment (the hatch bolts need swapping  out with longer bolts that we supply – 2 minutes and simple). No movement- no rattles!

When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off.

Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.

Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.

Fitting Services (highly recommended)

We now offer a fitting service in different location around the county.
Each location has different working patterns.
Generally the bike will need to be dropped of at prior arrangement and collect one working week later. but must include a full weekend in between.
Price £229 through the website of £200 direct to fitter and not included with the original controller purchase.

Current fitting locations are:

North Devon (Barnstaple)

Manchester – Eccles

South Shields

Birmingham Cannock

Self Fitting: Not too difficult and fitting help available here:

https://www.ko-moto.com/installationguides

We do not warranty damage caused from your fitting. Every kit is bench tested before leaving our premises.

We give UK support!!!!

* UK Warranty 

Our warranty is limited to 12 months from time of purchase. Due to the use and the nature of this device (Off-Road) and the potential excess  exposure to: water, rain, mud and the possibility to sustained high powered use/abuse, we do not warranty controllers that show signs of damage, excess heat or water penetration. All devices are fully bench tested working with a full working motor before leaving our premises. Any damage caused by your installation is not covered by our warranty. alteration may void warranty. This includes shortening of cables and changing connectors. We highly recommend the use of one of recognized fitters where installation is fully covered.

Warranties are not transferable.

We reserve the right to slightly modify or change this product without notice.

 

To reduce rattles and vibration, we include a small amount of high density foam to be placed in the top of the battery compartment – Please see photos

 

Disclaimer:

Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.

 

 

Additional information

Weight 19 kg
Dimensions 50 × 28 × 35 cm