£2,848.00 Original price was: £2,848.00.£2,649.00Current price is: £2,649.00. (price including VAT)
Talaria MX4 & MX3 GLE 67V ASI 10kW Marathon Kit ASI BAC4000 Marathon 67v *65Ah
NO PROGRAMMING NEEDED!!
Sorry no international shipping
The GLE BAC8000 for the Talaria MX4 and MX3 is the most powerful and buttery smooth plug and play controller system in the market. Designed for all versions of the Talaria including the MX 4 and MX 3. Brake Regen Lever! Our kit is also the ONLY version that is compatible with hall as well as encoder motors or any current and future motor! The included GLE Dashboard is a full featured vehicle dashboard interface that also assists the user in tuning and configuring every aspect of the vehicle including tuning, diagnostic, telemetry and dyno capabilities. This is a hassle free ready to run Plug and Play Kit. Green Line Engineering Inc. tunes and programs the controller with the most enabled features on the market.
Talaria MX4 and MX3 Emoto controller upgrade (Full Kit)
– Includes the highly anticipated GLE DASHBOARD, display, tuner, diagnostic and dyno app.
– Includes GLE Heatsink for BAC4000 (Black)
– Includes Regen thumb brake!
– Multiple braking modes ( lever regen, throttle off regen, combination of both, cut engine etc. ) All separately and independently tunable!
– Motor temperature shut down heat protection
– Easy Plug and Play Foot Brake feature enabled (foot brake sold separately)
– The most “Flush” and “Safest” mounting system in the market with NO side gaps.
– The highest mounted controller system, avoiding water, mud, dirt and debris from accumulating on the controller inputs.
– Can easily hot swap in seconds between different batteries with the app, for example easily swap between 60 volt and 72 volt batteries and back down.
– Includes Talaria plug and play harness
– Includes motor phase extended cables
The safest BAC mounting system in the market. Our custom programming and harness avoids crossing the high temperature controller and motor phase wires with the custom harness and thus avoids the potential of any short circuits. All other kit providers leave large gaps after the installation, crossing harness with phase wires and creating the potential for an electrical short circuit.
High Power Sur Ron Battery 3900Wh Samsung 21700 cell, with ANT Bluetooth BMS (works on IOS and Android) designed to fit inside the Sur Ron battery compartment utilizing the existing battery tray. The Cells are genuine branded cells specifically designed for large capacity storage and reliability. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 208 cells that retail in the UK for around £6 each! not including: BMS, fabrication and shipping taxes.
The whole battery is fitted in hand made stainless steel case designed to handle those inevitable and hopefully not painful “Offs” with hard off road rides and giving masses more protection. The casing is powder coated inside and out.
The battery does not have an integrated voltmeter. If you are using this with a standard controller, a handlebar voltmeter is supplied and can be simply plugged into the charge port of the battery to show voltage (empty at 48V). For after market controllers, that show battery voltage (like ASI) the voltmeter is not required.
Some versions of the Sur Ron controllers may go into limp mode if using this battery with no communication port (not using an aftermarket controller). This will need a very simple mod to the plug that normally connects to the battery. Please see the photo of the battery communication connector and the two pins that are crossed with a simple piece of: wire, or spade connector or similar piece of conductive metal. Note the area circled in red.
For bike that do not have a display to show voltage, We include a handlebar mounted display to be located on the throttle side. Simply plug into the charge port of the battery when riding.
Please ALSO note, these are genuine new cells and made up into complete battery specially designed by us, built at our oversees factory or here in the UK by our dedicated battery builders. We simply can’t buy a single battery, Thanks to Paypal fees, shipping and taxes the markup is minimal!
When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off.
Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.
Please note, charger is not supplied but can be found here:+https://www.electroncycles.co.uk/product-category/batteries/
* 12 Month Warranty is for manufacturing defaults and does not cover misuse or accidental damage. These units are extremely strong and robust and will not let you down unless abused. We undertake warranties here in the UK. We take the pain!
Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.
The controllers are fully bench tested working with a full working motor before leaving our premises. Any damage caused by your installation is not covered by our warranty. We highly recommend the use of one of recognized fitters where installation is fully covered.
Warranties are not transferable.
We reserve the right to slightly modify or change this product without notice.
Bike not included.
We give UK support!!!!
* UK Warranty
Our warranty is limited to 12 months for battery and 6 months for the controllers from time of purchase an dis for manufacturing defects. Due to the use and the nature of this device (Off-Road) and the potential excess exposure to: water, rain, mud and the possibility to sustained high powered use/abuse, we do not warranty controllers that show signs of damage, excess heat or water penetration. All devices are fully bench tested working with a full working motor before leaving our premises. Any damage caused by your installation is not covered by our warranty. alteration may void warranty. This includes shortening of cables and changing connectors. We highly recommend the use of one of recognized fitters where installation is fully covered.
Bike not included
Disclaimer:
Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.