£1,349.00 (price including VAT)
Talaria MX4 & MX3 ASI BAC8000: Fully assembled: GLE Loom, Brake Regen Heat Sync
* UK Warranty
International shipping available – 20% VAT removed
These are UK stock and ready for dispatch
The GLE BAC8000 for the Talaria MX4 and MX3 is the most powerful and buttery smooth plug and play controller system in the market that allows full customer end use programming. Works on all versions of the Talaria including the MX 4 and MX 3. This kit is also the ONLY version that is compatible with hall as well as encoder motors or any current and future motor! The included GLE Dashboard (mobile phone application) is a full featured vehicle dashboard interface that also assists the user in tuning and configuring every aspect of the vehicle including tuning, diagnostic, telemetry and dyno capabilities. This is a hassle free ready to run Plug and Play Kit. Green Line Engineering Inc. tunes and programs the controller. You the customer can then tune it to your preferences. This kit is supplied with minimal support from Electron Cycles and will be supported by GLE in the USA
Talaria MX4 and MX3 Emoto controller upgrade (Full Kit)
– Includes the highly anticipated GLE DASHBOARD, display, tuner, diagnostic and dyno app.
Include Aluminium CNC Heat Sync – Mounting plate
– Includes Regen thumb brake!
– Multiple braking modes ( lever regen, throttle off regen, combination of both, cut engine etc. ) All separately and independently tunable!
– Motor temperature shut down heat protection
– The highest mounted controller system, avoiding water, mud, dirt and debris from accumulating on the controller inputs.
– Can easily hot swap in seconds between different batteries with the app, for example easily swap between 60 volt and 72 volt batteries and back down.
– Includes Talaria plug and play harness
– Includes motor phase extended cables
Power Sets and Battery Compatibility: ASI BAC8000 Max Motor Power: Sur Ron = 13.7kW. KO = 20kW (battery will dictate full power): Max Power levels with battery. *60v Bypass battery to = 7500W *Trail 60v 63Ah Battery = 10500W *Marathon 67v Battery = 10500W *RaceV2 72v 42Ah =15.6kW *DomintatorV2 55AH = 15.6kW
The controller comes fully potted and with all leads and looms fitted and waterproofed. The mounts are in place, stainless steel and powder coated in black.
Power levels:
Please note that running on full power for your type of battery, non stop with a wide open throttle is not a good idea and effectively red lining the motor like on a petrol bike. We strongly recommend you follow our install guide: drill holes in your bash guard, remove the restrictive rubber boot and foam padding ( to increase air flow over the motor). Increased air flow over the motor (cooling) will increase reliability and stop thermal roll back kicking in so quick (where power is reduced temporally to help the motor). However if you do ride very very hard and get close to overheating the motor, Our new improved thermal roll back will gently cut the power until the motor cools enough to accept full power again. This only tends to happen if your riding full open throttle down a very long straight road.
Unleash more performance and range with correct gearing. Higher gears (Smaller rear sprocket) does not mean higher top speed. Over laboring the motor with the wrong gearing costs top speed, acceleration and range.
A fast efficient spinning electric motor goes better – simple!.
Our recommendations for a fully equipped 72v system:
For road use: 10-14 stone rider 52T. 15-17 stone rider 54T. 18+ stone rider plus: 56T
For Off Road/Off Road: 10-14 stone rider 54T. 15-17 stone rider 56T. 18+ stone rider plus: 58T
Pure Off-road/MX Race: 10-14 stone rider 56T. 15-17 stone rider 58T – 60T. #
Controller Feature Set
We reserve the right to slightly modify or change this product without notice.
Bike and battery not included
Disclaimer:
Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.