SVMC72200 Sabvoton 36FET 72V 200A Controller, Colour 750c Display, Bluetooth Adapter

£449.00 £399.00 (price including VAT)

SVMC72200 Sabvoton 36 FET 72V 200A Controller, Colour 750c Display, Bluetooth Adapter

Out of stock


SVMC72200 Sabvoton 36FET 72V 200A Controller, Colour 750c Display, Bluetooth Adapter


nothing more to pay

Higher Volts, Higher Amps Higher RPM+  Higher Speed !

For international orders, please email, to be sent a Paypal invoice to pay by all major credit cards

UK buyers in the extremes of the kingdom:Northern Ireland, Outer Hebrides, Highland etc, you may get asked to pay a shipping supplement of £10


This is a true 200Amp 36 Mosfet controller and not an unlocked 150A 30 Mosfet (check the size of other controllers, the 200A is longer at 280mm)

This controller is not true plug n play but designed for medium to experienced bike boulders and there is only limited support we can give.

The MQN app for smart phones, is very easy to use. The screen and throttle are simple plug into the loom via the pre-configured JST and Higo connectors, but the hall sensor and phase wires must be joined to your motors. For QS motors the hall and phase wires use the same colour coding, for MXUS there is a simple swap around on phase. The MQN app has auto sensing of the hall position to make set up easy.

The Latest TFT screen has: speedometer, battery voltage, fuel gauge, power meter, speed and distance trip meters, power level selection, clock..
Settings are easily changed using the intelligent handle bar multi switch.


Controller Specifications:
Sabvoton 72V Controller (36V-72V) Maximum battery Voltage 90v
200A maximum battery amps
Controller Weight: 3KG
Controller Dimension: 283mm*147mm*62mm
Can boost top speed and motor RPM with Field Weakening
Compatible with most hub motors such as 9C, Crystalyte, Cromotor, MXUS, EDGE, and QS Motor
Regenerative braking (on throttle release), E-Brake (brake switch regen)
5 Power Assist levels
Multi Function TFT Display and Handlebar switch set

1). sine wave controller, programmable, with regen function

2). DC Current Limit: 200A

3). Max. Phase Current: 450A

4). Battery Voltage: 48V-72V rated, Max. 90V

5). Thermic Probe: KTY83-122

6). Including one controller + USB convertor cable + matched plug

7). controller size: 283mm*147mm*62mm

8). Net weight: 3.0kg

9). Default  including bluetooth adapter.

10). Default function: Hall, Throttle, Electric Lock, High Brake Level, Temp sensor, 0-5v e-brake, three speed switch, Hall speedometer.

0-5v e-brake Pin Definition

Red: brake +5v

Brown: brake signal

Black: brake negative

Three Speed Pin Definition

Pink: high speed

Black: GND

Transparent: low speed

High brake Pin Definition

Purple: high brake

Hall Pin Definition

Red: Hall +5v

Yellow-white: temp sensor

Black: Hall negative

Yellow: Hall signal(U)

Blue: Hall signal(W)

Green: Hall signal(V)

Ignition Definition

Orange: Ignition

Hall speedometer Definition

Dark blue: Hall speedometer


6 Month warranty





Additional information

Weight 3.5 kg
Dimensions 40 × 25 × 25 cm