Sur Ron “Atomic White” Super Bright Light
Made from Aluminium
Plug n Play, 12V
with Handle Bar Switch
Stainless +Powder Coated Mounting Bracket
Desigend by us, here in the UK
Free UK mainland shipping.
International orders taken and 20% tax removed at check out, but additional shipping,
EU ordrs only avaialbe available on Ebay
We ride our bikes and we REALLY like to see where we’re going. Absolutely sick of the junk thats out there? so we built our own. We found a brilliant made UK supplier for the light, then made our own brackets and loom, added a Sur Ron loom connector and handle bar on/off switch and here it is!.
This plugs and play onto the bike and takes about 10 minutes to install – so simple. Just bolt onto the direct mount of your forks (we supply the bolts too in case you’ve lost yours), then undo the two allen bolts on the key binnacle, pull the old plug out and push the new one in. The light turns on and off at the key just like the original – just sh1te loads brighter – no taking off grips or anything!!.
How bright is the light? It will blind you! It will show up the trail and surrounding area. Its not just a glow, its absolutely stunningly bright. Thanks to both a wide angle and spot lenses and loads of LED power, this genuine 6000K white colour (2100 Lumens) light is the business, simple as – Brilliant!!!!!
Power consumption is modest 30W and it wil lhandle mud and water as ip67 rated.
No plastic, everything is either aircraft grade aluminium or stainless steel (powder coated)
Light in Action video to follow!!
12/24V 30W LED light with a spot/flood dual beam for wide view and long distance
- Can be used on either 12V or 24V
- Power output: 20 x 1.5 LEDs (30W)
- Beam angle: Spot 30° / Flood 60°
- Robust polycarbonate lens
- Complete plug n play loom
- IP67 dustproof and waterproof
- Cool white colour output of 6000K (2100 lumens)
- Stainless steel but powder coated, fork direct mount barcket
- 4 stainless m6 mounting bolts.
Brief fittng instructions:
Remove the two screws that hold the key binnacle in place.
Follow your existing light cable back to the plug located under the binnacle.
Press the clip to allow the plugs to separate (the small clip is the small circle in the photo).
Now plug in your new plug already attached to the new light.
You can now bolt the switch onto the handlebar and attached the light bracket to the top of the forks, just under the handle bars, where top fork yoke has 4 holes.
We reserve the right to slightly modify or change this product without notice.
Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.
Lithium batteries by nature are considered hazardous items and should never be brought in to the family home or any other structure where fire may cause risk to: life, injury or possession. Batteries should always be charged and stored in a safe fireproof place. While being used, the safety to others and others property must be considered and is the direct responsibility of the purchaser. Any harm to the purchaser or other third parties or property is not the responsibility of Electron Cycles or any person trading on or behalf of the business known as Electron Cycles and hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any products or any costs or damages resulting from these items purchased or otherwise obtained from Electron Cycles or any person trading on or behalf of the business known as Electron Cycles