Sale!

Sur Ron 60v 63Ah Long range “Direct Swap”

£1,699.00 (price including VAT)

Sur Ron 60v Long range “Direct Swap” Battery 63Ah

Out of stock

Description

Sur Ron 60v Long Range “Direct Swap” Battery 63Ah

16S13P 63Ah Panasonic 21700

Full Function Bluetooth BMS

UK Warranty 12 Month Warranty

Now in a Tough Protective Stainless Steel case powder coated black !

Light weight Powerful and only 18 KG!

Fully Protected by BT BMS

Sorry Only Ship To UK Mainland – No overseas – Sorry No International shipping

We dispatch within three working days.

Free UK Shipping

Designed to run on the standard Sur Ron bike as a direct swap in battery, increasing the range over 200%

Use your standard controller (no real power increase – just range) or swap out your controller and set it to 190A DC and phase max at 400A. Use with the: ASI BAC2000, ASI BAC4000 or ASI BAC8000 and Nuclear controllers (any 60v capable controller); have a safe and genuine fast bike that will give heaps of range and fun. The battery is very similar design as its fast brother, but using a different cell and configuration to give maximum range without being crazy tall. We have given this battery a huge range. Perfect for trail riding or long distance commuting.

These are designed to go straight into a standard bike with X controller or for bikes that are set at 190A DC 400A phase.

If this battery is to be used by a third party controller, Max setting 190A. DC

This will work perfectly with the original X Controller but still only taking 4-5000 watts (you need a bigger controller for more power).

High Power Sur Ron Battery 16S13P 60v  3780Wh 63Ah Panasonic  21700 cell (4800 mAh  per cell),  with ANT bluetooth BMS (works on IOS and Android) designed to fit inside the Sur Ron battery compartment utilizing the existing battery tray. The Cells are genuine branded cells specifically designed for large capacity storage and reliability. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 208 cells that retail in the UK for around £6 each! not including: BMS, fabrication and shipping taxes.

The whole battery is fitted in  hand made stainless steel case designed to handle those inevitable and hopefully not painful “Offs” with hard off road rides and giving masses more protection. The casing is powder coated inside and out.

The battery does not have an integrated volt meter. If you are using this with a standard controller, a handlebar voltmeter is supplied and can be simply plugged into the charge port of the battery to show voltage (empty at 48V). For after market controllers, that show battery voltage (like ASI) the volt meter is not required.

Some versions of the Sur Ron controllers may go into limp mode if using this battery with no communication port (not using an aftermarket controller). This will need a very simple mod to the plug that normally connects to the battery. Please see the photo of the battery communication connector and the two pins that are crossed with a simple piece of: wire, or spade connector or similar piece of conductive metal. Note the area circled in red.

Specifications.

16s13p Panasonic  21700.
Bluetooth ANT BMS.
Each cell with additional individual wrapping for added protection.
Additional layers of fiber board, Kapton tape, heat shrink with internal/external powder coated stainless steel sealed box to give maximum protection and insulation.
Double sandwich configuration using 0.2mm pure welded nickle sheet.
Bluetooth BMS giving individual series condition with balanced charging and on/off function via a mobile device (we recommend always leaving on – never use SHUTDOWN)
An integrated handle for lowering the battery in and out.
Battery gauge to be seated on handlebars – not need if buying an after market controller with a volt display.
Integrated lifting strap.
Charging port via an XT60 connector with a free adapter to go straight onto your original Sur Ron charger.
The main battery to controller connectors we use are the same type as used by Sur Ron to keep everything compatible. This allows you to swap your standard battery back should you wish.
Battery is in a super tough hand built stainless steel case designed to keep your battery safe in an accident and waterproof  except immersion or direct jet washing at the cable exits. Designed to fit straight into the bike and maximize the whole battery compartment (the hatch bolts need swapping  out with longer bolts that we supply – 2 minutes and simple). No movement- no rattles!
Your Sur Ron charger will recharge the battery, but to get full range, you will need to purchase our 60 V charger or our recovery charger. The standard SR charger can only go as low as 54V  yet the battery can go as low as 48V
From our tests, not all Sur Ron frames are exactly the same. Sur Ron recently seem to have let their quality control down a bit. On our mark two prototype (pre releases) we suddenly found that our case did not fit in the 4th bike we tested it in, Sur Ron hand not cleaned the battery compartment frame welds. We then went back to the drawing board and re-designed the case.
The new and for sale case has flitted all 4 test bikes. Its a snug and tight fit to maximize the cell capacity and keep the battery as low as possible. It is very slightly possible that there is anther bike out there with poor welds. In this case there is a very  small possibility that your bike welds will need cleaning up with a Dremel/grinder, although with this latest design we have not found this in over 50 installs. This is a simple job and causes no damage to the bike. I would like to make the point clear that we do not expect this to be needed  by 99.9% of our customers the battery should slot straight in.

Please ALSO note, these are genuine new cells and made up into complete battery specially designed by us, built at our oversees  factory or here in the UK by our dedicated battery builders. We simply can’t buy a single battery, Thanks to Paypal fees, shipping and taxes the markup is minimal!

When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off.

Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.

* 12 Month Warranty is for manufacturing defaults and does not cover miss use or accidental damage. These units are extremely strong and robust and will not let you down unless abused. We undertake warranties here in the UK. We take the pain!

Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.

Please note, charger is not supplied but can be found here:+https://www.electroncycles.co.uk/product-category/batteries/

 

Disclaimer:

Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a minimum of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.

 

 

 

 

Additional information

Weight 16 kg
Dimensions 50 × 30 × 30 cm