EBMX XUB-80 Motor – Motor for SurRon Ultra Bee (Air Cooled) Red. Including Shipping and Taxes.

£1,699.99 (price including VAT)

EBMX XUB-80 Motor – Motor for SurRon Ultra Bee (Air Cooled) Red. Including Shipping and Taxes.

1 in stock

Category:

Description

EBMX XUB-80 Motor – Motor for SurRon Ultra Bee (Air Cooled) Red.

UK Stock, No Waiting, Includes Shipping Taxes !!

International sales available via email (20% Tax removed, bank transfer and individual shipping quote)

Limited stock.

Description:

Slightly bigger with an 80mm Stator thickness and more powerful than its little brother the XLB-60.

40KW rated & designed from the ground up to handle the heat, 180C rated windings with U42H magnets.

Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 12000RPM.

Encoder based motor control for increased low end torque response and smooth predicable power delivery.

We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.

The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.

In contrast to many of our competitors who utilise hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.

Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result they can deliver a smoother more responsive and controllable powerband and they do not generate the same type of current spikes that often cause controller issues. Furthermore, they contribute to improved low-end torque control and overall motor response.

EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning.

 

Code: MTR016
PLU: 40107
Current Type: DC
Maximum Power (Peak 40000W
Maximum RPM: 10001 RPM – 15000 R
Peak Torque: 65 Nm
Max Stable RPM 12000RPM
Motor Configuration: 10Pole and 12 Slots
Sensing Method: NJDC 605Encoder
KV Value 85-90KV
Rated Power: 1505Kw (28 minutes). 28Kw Continoius 2 mins 20 seconds
Max phase amps: 110A
Rated Current 500A
Waterporrfing IP67
Reference OE/OEM Number: 116000115
Type: Drivetrain Motor
Manufacturer Warranty: Lifetime
Mounting Style: Clamp-On
Performance Part: Yes
Universal Fitment: No
Voltage: 48V-104V

 

We give UK support!!!!

Nope, the bike isn’t included.

* UK Warranty 

Our warranty is limited to 2Years  from time of purchase. Due to the use and the nature of this device (Off-Road) and the potential excess  exposure to: water, rain, mud and the possibility to sustained high powered use/abuse, we do not warranty controllers that show signs of damage, excess heat or water penetration. All devices are fully bench tested working with a full working motor before leaving our premises. Any damage caused by your installation is not covered by our warranty. alteration may void warranty. This includes shortening of cables and changing connectors. We highly recommend the use of one of recognized fitters where installation is fully covered.

Warranties are not transferable.

We reserve the right to slightly modify or change this product without notice.

 

Disclaimer:

Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.

 

 

Additional information

Weight 13 kg
Dimensions 35 × 28 × 35 cm