BBSHD 48/52V Custom Motor 1600 Watts (Peak) Fat Bike 100mm kit special order 850c Colour Display

£779.00 (price including VAT)

Fat Bike 100mm BB Bafang BBSHD 1600 watts Very latest Kit with Colour Display, 850c and Gear Sensor. Special Order

Available on back-order



Custom Bafang BBSHD 1600 Watts (Peak) Fat Bike 100mm kit special order 850c Colour Display

We have to special Order delivery around 10-14 working days – UK Warranty

Now supplied with 36T front chain wheel (can be swapped for 42T if not being used on a fat bike)

Due to lack of demand theses are now special order only. Approximate delivery time 10 – 14 days.

Because of small amount of sales, we can not buy these in bulk direct from Bafang and increased shipping rates, prices are higher than the 68-73mm model.

Please state size when ordering via order notes or separate email

Does not include shipping for Outside UK  – Please Contact for quote

UK shipping included and taxes included

FAT BIKE  100 mm BB

Front chain wheel 46T

Latest Kit!!!

Now with Colour Display and Gear Sensor!!

52V batteries go faster and stay in the “power zone” longer than 48V!

 BBSHD Mid Drive kit is light but strong and unprecedented levels of engineering (Rated 1000W – 1500W dependent on setting and  have a proven to work reliably at 2500Watts) and Max Torque 160 NM) More efficient than HUB motors giving greater distance and response. This mid drive provides powerful ebike performance meanwhile keeps the original pedaling in comfort. With an integrated speed sensor, this mid-drive motor is compatible with standard bikes. Throttle only use in PAS mode “0” is available allowing to rest without pedaling and a further 9 levels available with “on the fly” switching.

These motors are regarded as the very best in the EBike world. Extremely quiet and robust. Fully waterproof and internally lubricated within sealed casings. There have been recorded distances of 25000 miles and still going!

This motor is designed to fit bikes with a Bottom Bracket 100mm

The motor is designed to work with batteries rated at 48 – 52 volts (can handle up to 59V).

Due to the rolling resistance of the extra large size tyres of a fat bike it is recommended that a smaller chain ring be used other than supplied and that low gearing be used above power level 5 (e.g. do not use full  power unless using a big cog at the rear).  We can recommend Brighton E-Bikes for a Lekkic chain ring recommended size 36T.

The motor with the correct battery is capable of speeds over 30 MPH, however riding the bike correctly will ensure longevity.

Please take note of the following tips. An electric motor likes to spin fast. it means it is not labouring and not wasting energy and converting it to heat (wasted power). Your human legs can only spin so fast. So, in the lower power modes 1-5, you can use all the gears and the motor makes good use of the power supplied combined with your legs. But after power level 5, your legs really can’t keep up and you can feel that you’re not pushing much through the pedals and not really helping. At this point, help the motor by selecting a “lower gear” at the rear (bigger cog). The motor will spin faster, use less power, go further than a smaller “higher geared” rear cog. Sometime more is less. To test the theory, find a straight piece of track. Have a go at full power in your smallest gear. The bike will accelerate sluggishly and slowly creep to a top speed and be in the red full power zone all the time. Not try the same again in a middle rear cog. The bike will accelerate faster and hit a top speed quicker, use less power and most likely go faster!

Motor weight: 5.8kg.

An independent review:

3 Months Of Singletrack Abuse On A BBSHD : This Masochistic Mid-Drive Still Begs For More

The kit comprises of:

BBSHD mid drive system : BB 100mm

 1.BBSHD + Mid-Drive Motor: 1 pc

  1. TFT850  Colour LCD Display + Operation Button: 1 pc (with power meter)
  2. Thumb Throttle: 1 pc
  3. Waterproof Quick Release Wires: 1 pc
  4. Speed Detecting Sensor + Magnet: 1 pc
  5. 46T Chain wheel: 1 pc (as of 1st March 2021 – does not apply to previous orders)
  6. Left Crank + Right Crank: each 1 pc
  7. Fixing Plate: 1 pc
  8. M5*10 Nuts: 5 pcs
  9. M6*12 Nuts: 2 pcs
  10. M33 Nuts: 2 pcs
  11. ST 3.9 Nuts: 5 pcs
  12. Gear Sensor
  13. 6v light cable
  14. Brake leavers

Weight of BBSHD motor: 5.8kg.

LCD display has the following features:


3.2 inch High-contrast IPS colorful dot screen.

Mileage :ODO Trip Time  Range.


  1. 3.2 inch High-contrast IPS colorful dot screen.
  2. CAN-BUS Communication Protocol.
  3. Customized Start-Up Logo , dynamic displaying.
  4. Set up Password of Turning on.
  5. Speed display: RT SPEED MAX SPEED AVG SPEED.
  6. KM/ Mile: Setting up adjustable according to customers’ habits.
  7. Mileage : ODO, Trip, Time, Range.
  8. Clock.
  9. Power indicator.
  10. Error code.
  11. USB charging port: 5V/500mA.
  12. Software Update.
  13. Friendly HMI.
  14. 36V/48V compatible.
  15. This product is compatible with the communication protocol system of 8Fun mid-drive motor kit. It can also be customized to be compatible with communication protocol system of Lishui and Ananda.

Attempting to reprogram the controller may cause damage and invalidate any warranty to the controller

We now offer a fitting service:

Prior appointment only

Different location around the county.

Does not include bike, or parts.

Bike must be dropped off in good working order and clean!

Additional repairs will be charged at £35 per hour – this is not a repair service!

Current fitting locations are:

North Devon (Barnstaple – Electroncycles)

North Wales (Baglit – Missel E-bikes)

Liverpool (Hyton – PowerEbikes)

6 Month Warranty not including the controller (controllers are susceptible to misuse)

**** Due to the nature of this device (Off-Road) and potential exposure to water, rain, mud and the possibility to sustained high powered use/abuse, our warranty is limited to 6 months from time of purchase.  Damage sustained through water ingress is not covered under warranty.  We do not warranty controllers with error code 30, as this is most often caused by the attempted reprogramming of the controller, or the use of non Bafang displays.

Warranties are not transferable.

We reserve the right to slightly modify or change this product without notice.


Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a period of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.

Additional information

Weight 9 kg
Dimensions 55 × 25 × 30 cm