£1,747.00 £1,699.00 (price including VAT)
BBSHD ASI BAC855 52v + Complete Motor, 2500 Watts 42-50 MPH + Hard Case 52V 28Ah
This is the fastest Off the shelf BBSHD solution in the world
Higher Volts, Higher RPM Higher Speed !
This is truly plug n play and expect RELIABLE speeds of around 40+MPH
Sorry No EU Shipping
Default setting will be 52V
Ultimate BBSHD, and Controller Screen – complete kit with Electron tunable PAS display and Gear Sensor motor cover all included!!
Did you ever wish your BBSHD went substantially faster, pulled harder and you didn’t have to be told you can’t buy the controller you want – shush it’s a secret?
Well thanks to a very clever friend of ours, we are the UK and EU distributor and co developer for this exceptional device.
Advanced processing and state of the art allows it to compute much faster and much more accurately than the standard Bafang unit (or any modded Bafang controller). Imagine your first media phone in comparison to the latest iPhone/Android device? – Things have moved on and these Canadian devices have not been designed with penny pinching mass market sales like the original. All of this makes your 72 V motor pull much harder and release around 15% more speed than a 50A Bafang controller and whopping 100% more power than the standard, while still using your standard display! (NB, please see our note about displays). We might add the power is designed to come in without the mechanical snapping lurch of an inferior set up.
We have tested the BBSHD to destruction and on more than one occasion right up to 4500 Watts and learned a few things, real facts and not the odd exception.
Amps create heat, heat weakens the nylon gear and too many watts snap the pinion. So how do we get around this? Simple, know the limits but don’t get too close. Sure these are now nearer the limit, but ridden correctly (let the motor spin and don’t labour in the wrong gear), a reliable ride can still be had. At the lower volts where big amps are needed, we have capped the limit to 50A but as you increase your volts, we capped the watts to 2800W. A ludicrous controller at 50A has 2500Watts – so does ours, but now add 10 -15% improvement through field weakening!
Because of the weakness of the Nylon gear, the use of low gears is necessary when using throttle but as the PAS Electron tuneable PAS display (Email request required after purchase) give a sublime full cassette pedalling experience. We recommend for full throttle: front 42T and rear no smaller that 28T on 29er or 27.5″ wheels and 26T on 26″ wheels.
We have tested this set up thoroughly with a 250 lb rider without issues.
No need for gear changes (although in low power mode this is still very usable with PAS) as the massive increased RPM range and large rear gear allows blistering acceleration and high top speed. Because of high voltage, low amps are used to obtain more watts. For example 72v x 50A = 3600 watts compared to 52v x 50A = 2600 watts. and we all know that high amps create motor killing heat, we limit the motor to 2800w.
You no longer need other gears! your weedy legs are obsolete!!
PAS function is available with a choice of up to 3 – 5 – 9 levels via the display Electron tuneable PAS display (Email request required after purchase). Rock Solid reliable with no updates required or leaky case.
ONLY OUR Electron tuneable PAS display or our 750c display will work for PAS without additional firmware.
Quick display demo: https://www.youtube.com/watch?v=Q3jwI4axDHw
Controller Feature Set
The kit includes:
ASI BAC855 52v FOC controller
Wiring loom to connect direct to existing BBSHD loom with Anderson Power connectors (please ensure you waterproof the white connector on the controller when) installing)
Motor side cover
Electron tuneable PAS display
Please note that the Bafang speed sensor was not designed for this unit and can become inconsistent with higher speeds
Please note our controllers are locked and will stay locked to protect the hours and hours we spent programming and developing them. Sorry no exceptions.
Gearing (video tutorial to follow or call for explanation):
Use a 42T front Chain wheel to “Clam Shell the motor and bring the chain line inbound – we sell a cheap Lekkie clone version)
Reduce your rear cassette size to improve the chain line, removing any gears smaller than 15T and create your perfect centre-line around the 26T/28T rear sprocket (depending on wheel size)
Remove the old 9 -10=11 speed cassette and use the gear range from 15T to lowest gear. We love the Shimano XT CS-M771-10 speed cassette as shown in the photo. Use spacers to give you a perfect chain line for the gear of your choice. For 27.5 and 29er set ups we recommend a 28T rear gear. For 26″ wheels a 26″ T gear. For fat bikes as big as you can get! (32T +)
If you want to be very smart, you can use a 2.35 mm spacer from your old cassette to space out a 17T as a “Get you home” cog for pedalling or PAS assist in power level 1. But you might have to manually put the chain onto the cog. Use your old derailleur as a tensioner and give your self enough chain (we recommend KMC x10e chains) to move up and down you have. You will want to adjust your max/min screws so the chain does not slip off the outer sprockets (You may need to change these for longer screws)
Photos of rear gears and spacers are not included
BBSHD Motor (standard):
BBSHD Mid Drive kit is light but strong and unprecedented levels of engineering (Rated 1000W – 1500W dependent on setting and have a proven to work reliably at 4000Watts) and Max Torque 160 NM) More efficient than HUB motors giving greater distance and response. This mid drive provides powerful ebike performance meanwhile keeps the original pedalling in comfort. With an integrated speed sensor, this mid-drive motor is compatible with standard bikes. Throttle only use in PAS mode “0” is available allowing to rest without pedalling and a further 9 levels available with “on the fly” switching.
These motors are regarded as the very best in the ebike world. Extremely quiet and robust. Fully Water resistant and internally lubricated within sealed casings. There have been recorded distances of 25000 miles and still going!
This motor is designed to fit bikes with a Bottom Bracket between 68 mm to 73 mm
The motor is designed to work with batteries rated at 48
Motor weight: 5.8kg.
An independent review:
3 Months Of Singletrack Abuse On A BBSHD : This Masochistic Mid-Drive Still Begs For More
The kit comprises of:
BBSHD mid drive system : BB:68-73MM
1.BBSHD + Mid-Drive Motor: 1 pc
Please note, to reduce the price we remove the standard Bafang controller at the cost price.
Weight of BBSHD motor: 5kg.
The ASI BAC855 is locked by us and cannot be re-programmed by third parties. The Bluetooth function is also locked. We do this to protect our intellectual property and the try to recoup some of the hours and hours or programming and testing that went into this device.
Warranty: The ASI is compete covered by our 12 month warranty. It does not cover accidental damage or damage from shorts or water.
The BBSHD is fortunately not covered. This device is being sold to you to be used in a tuned non factory set up. If used correctly with the correct gearing, it is a reliable for thousands of miles, But like any customized or “tuned” product, is liable for failure if used incorrectly.
Battery with Charger:
We normally only sell our own bespoke batteries, but when we found these, we were so impressed that we decided to buy some in and sell them pour selves.
Tough hard ABS cases that are water sealed, LED batter display and quality on/off swatch. There’s another well known manufacturer (low quality) hard case seller out there that simply does do a good enough job (we booted then four years ago)..Our supplier took the case idea from them, went back to the drawing board and decided to o it properly!
Please ensure the charger is plugged in the mains socket and turned on before connecting to the battery to charge.
PURE Nickle strip
Inn house quality BMS that wont fail.
50 Amps continuous discharge but peaks of 150A!
28Ah @ 52V giving 1400 Watt Hours – Brilliant range for a triangle in frame battery!!! (this is 3 times bigger than the standard Bosch Powerline battery.
0.2 mm pure nickle sheet welded.
112 x Panasonic GA 3.5 AH (20s5P) 18650 cells (best in class) 20S5P.
Anderson XT90 Discharge – Or Anderson Power Pole (Black + red just ask what you want at checkout
Anderson XT60 Charge
Incudes 4A charger
Attempting to reprogram the controller may cause damage and invalidate any warranty to the controller.
* Warranty, due to the nature of use of these devices (off road) warranty is limited to 12 months from date of purchase. Any damage the result of water ingress, alteration, may void warranty. This includes shortening of cables and changing connectors. It is the owners responsibility to proof against water ingress and not use in unacceptable very wet conditions, or use direct water from hose/washers. Any alteration modification to this controller or its subsequent wiring, even cutting the power leads to make shorter will immediately invalidate any warranty. Even battery disconnected, the controller can still maintains current and can be shorted/damaged. The controllers are waterproof, but can still suffer from water damage through the connector and hence are not covered for water damage. Controllers are not covered by warranty after 14 days.
Using high PAS in a high gear under heavy load may cause the controller to overheat (power level 9 in a small rear cog). Gears should be used going uphill or any other heavy load.
Attempting to reprogram the controller may cause damage.
Warranties are not transferable.
We reserve the right to slightly modify or change this product without notice.
We reserve the right to slightly modify or change this product without notice.
Buyer releases Electron Cycles or any person trading on or behalf of the business known as Electron Cycles from any liabilities, therein known as Electron Cycles (expressed or implied, arising by law or otherwise) that may occur from the use of products sold by Electron Cycles and purchased by Buyer. These products are being sold for “Off Road/Competition Use” only and may be used only on two wheel vehicles (bicycles, electric bicycles, two wheel electric powered vehicles) used solely for “Off Road/Competition” (off-road being defined as a private land with land owners permission and not public highway or byway). The Buyer also recognises that Lithium batteries are classed as hazardous and should not be: stored, used, charged in place, facility any area that is not fire proof or safe to do so. That batteries should not be taken into the family home, office, workplace or school place. No other applications are intended or implied. The Buyer of product sold or provided by Electron Cycles acknowledges and agrees that Seller disclaims any warranty and expressly disclaims any liability for personal injury or damages or any damages to vehicle, expensed occurred, personal property or third persons. Electron Cycles will uphold the warranty of the manufacture of the product sold for a minimum of six months from date of purchase from manufacturer defect. In the event a manufacturer’s warranty exists, it is agreed and stated that Under no circumstances shall the seller or manufacture be liable for any labour charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any contingent expenses.
Lithium batteries by nature are considered hazardous items and should never be brought in to the family home or any other structure where fire may cause risk to: life, injury or possession. Batteries should always be charged and stored in a safe fireproof place. While being used, the safety to others and others property must be considered and is the direct responsibility of the purchaser. Any harm to the purchaser or other third parties or property is not the responsibility of Electron Cycles or any person trading on or behalf of the business known as Electron Cycles and hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any products or any costs or damages resulting from these items purchased or otherwise obtained from Electron Cycles or any person trading on or behalf of the business known as Electron Cycles