Battery 72v High Power 3024Wh 42Ah Remote On Off 

£2,099.00 (price including VAT)

Sur Ron 72v High Power Battery 20S10P 72v 3024Wh 42Ah Remote On Off

Out of stock

Description

72v High Power Battery 20S10P 72v 3024Wh Molicell P42A

Bluetooth BMS (remote on/off battery & status).

UK Warranty

Now in a Tough Protective Stainless Steel  case powder coated black !

Light weight Powerful and only 15.2 KG!

Fully Protected by BT BMS

Due to vacation back in stock 20 September 2021

Sorry Only Ship To UK Mainland – No overseas – Sorry No International shipping

We dispatch within three days

Free UK Shipping

For international orders please email for a quote on shipping. Mainland EU only (no air shipping) info@electroncycles.co.uk

Designed to run the ASI BAC4000 or ASI BAC8000 and Nuclear controllers  (any 72v capable controller) up to 320 Amps Peak.

These are designed for bikes that are set at 13,500W. They can go much higher for peaks of up to 23,000 watts (the Sur Ron motor is manufacturer rate at 10,000 for 1 minute). The owner of Electron Cycles is a 280lb man riding his bike hard at 13,500 watts, struggling to keep the front end down at 13,500 watts using a ASI BAC8000.

If this battery is to be used by a third party controller the controller can not be set above 13,500 watts.

This will not work with the original X Controller.

These power packs are designed for ultimate power supply and are 57.5% bigger watts hours (3024) compared to the std battery (1920) and able to give out almost 3 times the power (discharge -amps)

High Power Sur Ron Battery 20S10P 72v  3024Wh 42Ah Molicell p42A 21700 cell (high power 4200 mAh  per cell),  with ANT bluetooth BMS (works on IOS and Android) The Cells are genuine branded cells specifically designed for high output discharge and sustained high drain. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 200 cells that retail in the UK for around £6 each! not including: BMS, fabrication and shipping taxes.

The whole battery is fitted in  hand made stainless steel case designed to handle those inevitable and hopefully not painful “Offs” with hard off road rides and giving masses more protection. The casing is powder coated inside and out.

Specifications.

20s1op Molicell p42A 21700.
Bluetooth ANT BMS set at 330  Amps Peak full battery protection including over discharge (shorts) over heating etc
Each cell with additional inviduall wrapping for added protection.
Additional layers of fiber board, Kapcon tape, heat shrink with internal/external powder coated stainless steel sealed box to give maximum portection and insulation.
Double sandwich configuration using 0.2mm pure welded nickle sheet.
Bluetooth BMS giving individual series condition with balanced charging and on/off function via a mobile device (we recommend always leaving on – never use SHUTDOWN)
An integrated handle for lowering the battery in and out.
Charging port via an XT60 connector.
The main battery to controller connectors we use are the same type as used by Sur Ron to keep everything compatible. This allows you to swap your standard battery back should you wish.
Battery is in a super tough hand built stainless steel case designed to keep your battery safe in an accident and waterproof  to IP67 (jet washing and 1m submersion). Designed to fit straight into the bike and maximize the whole battery compartment (the hatch bolts need swapping  out with longer bolts that we supply – 2 minutes and simple). No movement- no rattles!
THIS KIT DOES NOT INCLUDE A CHARGER. Chargrs can be found here (10A MAX):
https://www.electroncycles.co.uk/product-category/batteries/

Please ALSO note, these are genuine new cells and made up into complete battery specially designed by us, built at our oversees  factory or here in the UK by our dedicated battery builders. We simply can’t buy a single battery, Thanks to Paypal fees, shipping and taxes the markup is minimal!

When connecting the battery to the bike and to avoid a spark. Turn the red trip switch on the bike to off. Connect the older original power cable and then turn the red trip to on. Then connect the new power leads. Removing battery has no specail order.

Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.

* 6 Month Warranty is for manufacturing defaults and does not cover miss use or accidental damage. These units are extremely strong and robust and will not let you down unless abused. We undertake warranties here in the UK. We take the pain!

Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.

Please note, charger is not supplied but can be found here:+https://www.electroncycles.co.uk/product-category/batteries/

 

 

 

 

 

 

Additional information

Weight 16 kg
Dimensions 50 × 30 × 30 cm