Sale!

Bafang BBSHD 1700 Watts (Peak) 850c Display+ 52V 21Ah Battery + Charger Super Long Range Kit

£1,198.00 £1,178.00

Bafang BBSHD 1700 Watts (Peak) 850c Display+ 52V 21Ah Battery + Charger Super Long Range Kit

Category:

Description

Bafang BBSHD 1700 Watts (Peak) 850c Display+ 52V 21Ah Battery + Charger Super Long Range Kit

This is UK STOCK! NO IMPORT TAX!

* UK Warranty

Latest Kit!!!

Your bike on the flat will attain 33+ mph, but in low PAS will go much further – ideal for touring

Now with Colour 850c Display and Gear Sensor and Brake sensor all included!!

Reprogrammed by us to  1700 Watts Max and superior PAS (Pedal Assist) settings for slightly longer range and durability.

 BBSHD Mid Drive kit is light but strong and unprecedented levels of engineering (Rated 1000W – 1700W dependent on setting) and  has  proven to work reliably at 2700Watts) and Max Torque 160 NM) More efficient than HUB motors giving greater distance and response. This mid drive provides powerful ebike performance meanwhile keeps the original pedaling in comfort. With an integrated speed sensor, this mid-drive motor is compatible with standard bikes. Throttle only use in PAS mode “0” is available allowing to rest without pedaling and a further 9 levels available with “on the fly” switching.

These motors are regarded as the very best in the EBike conversion world. Extremely quiet and robust. Fully waterproof and internally lubricated within sealed casings. There have been recorded distances of 25000 miles and still going!

This motor is designed to fit bikes with a Bottom Bracket between 68 mm to 73 mm

The motor is designed to work with batteries rated at 48 – 52 volts (can handle up to 59V) and highly recommended to be used with 52v batteries (stays in the peak zone longer).

Motor weight: 5.8kg.

An independent review:

https://electricbike-blog.com/2016/02/08/3-months-of-singletrack-abuse-on-a-bbshd-this-masochistic-mid-drive-still-begs-for-more/

The kit comprises of:

BBSHD mid drive system : BB:68-73MM

 1.BBSHD + Mid-Drive Motor: 1 pc

  1. 850c Colour LCD Display + Operation Button: 1 pc
  2. Brake Levers: 2 pcs
  3. Thumb Throttle: 1 pc
  4. Waterproof Quick Release Wires: 1 pc
  5. Speed Detecting Sensor + Magnet: 1 pc
  6. 46T Chain wheel: 1 pc
  7. Left Crank + Right Crank: each 1 pc
  8. Fixing Plate: 1 pc
  9. M5*10 Nuts: 5 pcs
  10. M6*12 Nuts: 2 pcs
  11. M33 Nuts: 2 pcs
  12. ST 3.9 Nuts: 5 pcs
  13. Gear Sensor
  14. 6v light cable


Weight of BBSHD motor: 5.8kg.

LCD display has the following features:

Features:

3.2 inch High-contrast IPS colorful dot screen.

Mileage :ODO Trip Time  Range.

Application:

  1. 3.2 inch High-contrast IPS colorful dot screen.
  2. CAN-BUS Communication Protocol.
  3. Customized Start-Up Logo , dynamic displaying.
  4. Set up Password of Turning on.
  5. Speed display: RT SPEED MAX SPEED AVG SPEED.
  6. KM/ Mile: Setting up adjustable according to customers’ habits.
  7. Mileage : ODO, Trip, Time, Range.
  8. Clock.
  9. Power indicator.
  10. Error code.
  11. USB charging port: 5V/500mA.
  12. Software Update.
  13. Friendly HMI.
  14. 36V/48V compatible.
  15. This product is compatible with the communication protocol system of 8Fun mid-drive motor kit. It can also be customized to be compatible with communication protocol system of Lishui and Ananda.

 

Shark Electric Bike 52v 21 Ah High Power LG MJ1 Battery & 3A Charger. UK Stock

Super Long range 14S6P 52v 21Ah LG MJ1 (high 3500 mAh  per cell and) with 3Ah UK charger. 30Amp Nominal BMS and double welded contacts).This is the highest Amp hours UK available downtube type battery on the market, designed to fit on down tube utilizing water bottle bolts. These are specifically designed for high output discharge and sustained high drain. Other inferior cells used in cheaper packs simply can’t deliver like these. If you think the cost is high, these batteries have 70 cells that retail in the UK for around £5 each! not including: BMS, casing , charger, shipping taxes AND FABRICATION.

We do not recommend these batteries for power output above 35A, these will handle all 35A or lower 48/52V applications but have been specifically built for the Bafang BBSHD and G510 Ultra drive. They have Anderson connectors and are “plug and Play” for Bafang BBS02/BBSHD motors.

Please ALSO note, these are genuine new cells and made up into complete battery specially to order for me at the factory. I simply can’t buy a single battery, I have to agree to a production run of at least 30 batteries. Thanks to Paypal fees, shipping and taxes the markup is minimal! Not all down tubes are the same and some slight modification maybe necessary to the mounting plate of the battery. You tube has an abundance of “How To” videos.

We recompend the purchase of Alfatex velcro 30cm * 3cm (avaialabe on Ebay) for additional support.

Google “Tip for hard mounting shark pack to bicycle frame Ebike

Space required, please see photo= 387mm * 100.6mm * 94.4mm

Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge as above. The charger will display two red lights (charging) after a long period of time (between 1 and 8 hrs – depending on state) the LED charger lights will display red and green. This indicates an initial charge is complete. However, as this is a new battery, not all cells within the battery are balanced (same state of charge as some were higher/lower than others to start with). This is because cells can arrive at the factory in different batches and may have slightly different charges due to time in storage). This is very common and normal. Now please leave the charger connected to the batteries for a further 12 hrs. This allows the internal balancing system (BMS) to balance out all the internal cells. The charge may turn on and off over this period of time. This “Balance charge does not need to be done every time and is recommended every 20+ charges. Leaving the charger plugged in working does not damage the batteries. The charger is designed to stop charging at a preset level and turn on again when this level drops.

* 6 Month Warranty is for manufacturing defaults and does not over miss use or accidental damage. These units are extremely strong and robust and will not let you down unless abused. We undertake warranties here in the UK. We take the pain!

Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.

Discounted when bought as a complete kit with BBSHD.

 

* 6 Month Warranty (Battery) 12 Months (BBSHD) is for manufacturing defaults and does not over miss use or accidental damage. These units are extremely strong and robust and will not let you down unless abused. We undertake warranties here in the UK. We take the pain!

Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.

Tips on riding:

The motor is not human and makes your bike a hybrid.

Motors like to spin fast, use less power and not over heat and most of all use less electricity!

A 9 speed bike for example.

The whole range of gears can be used with your legs only – no surprise.

If you want maximum range use very low PAS 1-3 and any gear you want to  let your legs assist.

Do not use high PAS in small rear cogs, you will kill your range! (your legs are not assisting).

Generally speaking, your cadence is much lower than the BBSHD’s possible 160 rpm. If you ghost pedaling at 30 mph in the 11T rear cog you are doing nothing to help the motor, BUT the motor actually wants to go to about 50 mph when it cant, because of resistance (tyres, road surface , Air etc) – you can use a cadence calculator online to check the speed with your gearing. When the motor can not achieve its ideal speed in a high PAS setting, it dumps loads of “Phase Amps” amps that are wasted producing heat as they cant be turned into motion and make the motor turn faster, they have saturated the motor.

As test, ride you bike flat out without the motor and see what your top speed is . This is he maximum speed will be the speed that you no longer assist the motor.

This is a general ism, as some very fit riders can achieve higher speeds in higher pas without over heating as they have a much higher spin rate, are lighter and powerful enough to push big gears ( do these people really need a an ebike?)

Now using throttle only, find your top speed using the gears. You will notice the smallest or highest gear does not give the top speed, but it will use the most amount of electricity. Go down a couple of gears (bigger rear cog) and the speed will not significantly drop, but your power consumption will – gives you more range!

So for range use the small PAS and any gear you like as your legs are helping and the motor is not trying to achieve to unobtainable top speed.

For top speed use the throttle only and use the best gear, not necessarily the smallest rear cogs.

I use a 42T front. I PAS only in level 2, but throttle for top speed with a 16 or 15 rear maybe ( i check my speed against power consumption).

If im really lazy, I leave it in 16 rear (its flat where I live), use PAS 2 to get to 10 mph (helps the motor ) then use throttle only to 30+mph. This saves the motor, saves the drive train and im lazy. If I want to go miles, I use all my gears and PAS 2 only and the throttle up a hill in a big rear gear with it spinning freely.

At 30 mph throttle only I get 15 miles (I weigh 20 stone).

In PAS 2 I got fed up testing at 40 miles.

Attempting to reprogram the controller may cause damage and invalidate any warranty to the controller