Bafang BBSHD 1700 Watts + 52V 15A Samsung 30Q High Power Discharge Battery 30A BMS

£1,148.00 £1,065.00

Bafang BBSHD 1700 watts Very latest Kit with Colour Display, 850c and Gear Sensor + 52v 15Ah Shark Battery UK Stock.

Out of stock



GENUINE UK SELLER, Delivered within 3 working days!!!!

Now with Colour Display and Gear Sensor!!

Reprogrammed by us to 1740 Watts max – 1560 Nominal and superior PAS (Pedal Assist)

This our highest powered kit available because of the incredible Samsung 30Q 5C cell.

The most powerful Output Verses range Shark battery available in the UK (52V 15Ah 14S5P 40A BMS)

BBSHD Mid Drive kit is light but strong and unprecedented levels of engineering (Rated 1000W ? 17500W dependent on setting and  have a proven to work reliably at 2500Watts) and Max Torque 160 NM) More efficient than HUB motors giving greater distance and response. This mid drive provides powerful ebike performance meanwhile keeps the original pedaling in comfort. With an integrated speed sensor, this mid-drive motor is compatible with standard bikes. Throttle only use in PAS mode “0” is available allowing to rest without pedaling and a further 9 levels available with “on the fly” switching.

These motors are regarded as the very best in the EBike world. Extremely quiet and robust. Fully waterproof and internally lubricated within sealed casings. There have been recorded distances of 25000 miles and still going!

This motor is designed to fit bikes with a Bottom Bracket between 68 mm to 73 mm

The motor is designed to work with batteries rated at 48 – 52 volts (can handle up to 59.9V) and highly recommended to be used with 52v batteries with Samsung 30Q batteries (equally the best on the market – please see other listings for availability or combined listing for discount).

Motor weight: 5.8kg.

An independent review:

The kit comprises of:

BBSHD mid drive system : BB:68-73MM

1.BBSHD + Mid-Drive Motor: 1 pc

2. TFT 850c  Colour LCD Display + Operation Button: 1 pc

3. Brake Levers: 2 pcs

4. Thumb Throttle: 1 pc

5. Waterproof Quick Release Wires: 1 pc

6. Speed Detecting Sensor + Magnet: 1 pc

7. 46T Chain wheel: 1 pc

8. Left Crank + Right Crank: each 1 pc

9. Fixing Plate: 1 pc

10. M5*10 Nuts: 5 pcs

11. M6*12 Nuts: 2 pcs

12. M33 Nuts: 2 pcs

13. ST 3.9 Nuts: 5 pcs

14. Gear Sensor

15. 6v light cable

?Weight of BBSHD 48v1000w motor: 5.8kg.


LCD display has the following features:



3.2 inch High-contrast IPS colorful dot screen.

Mileage :ODO Trip Time  Range.


1. 3.2 inch High-contrast IPS colorful dot screen.

2. CAN-BUS Communication Protocol.

3. Customized Start-Up Logo , dynamic displaying.

4. Set up Password of Turning on.


6. KM/ Mile: Setting up adjustable according to customers’ habits.

7. Mileage : ODO, Trip, Time, Range.

8. Clock.

09. Power indicator.

10. Error code.

11. USB charging port: 5V/500mA.

12. Software Update.

13. Friendly HMI.

14. 36V/48V compatible.

15. This product is compatible with the communication protocol system of 8Fun mid-drive motor kit. It can also be customized to be compatible with communication protocol system of Lishui and Ananda. We are able to take OEM orders.

The following install guide may give a little more clarity on how to install.

Please note the video was made by Luna Cycle in the USA, probably the best customized – conversion Ebike Company in the world. I have no affiliation with them other than being the occasional customer. This is a small company run by Eric Hicks pushing the envelope on fast Ebikes.

People keep asking us ?Do I need to fit the Bafang Levers, I have hydraulic brakes?

The simply answer is a very definite NO.

The motor when being used in PAS (Pedal Assist) has a small run on time when you stop pedalling. Its less than a second and quite honestly with the fasted reaction time, its still most likely that your too slow to notice the motor pulling. If you?re an extreme off roader (not sure this kit needed if you are) then you may notice a little run on when your dogging a tree on a tight trial. Personal I never fit them. We do sell a ?stick on convertor? for your old brakes, but honestly its not needed (Were doing ourselves out of a small sale!) Keep your original brakes (If they?re hydraulic)

Because of time wasters and cost of postage and the fact that this item is fully working, I do not accept returns (because you have changed your mind) Your buyers rights are not affected and are protected by Ebay/Paypal.

UK Law states that these units be used for off road use only. The purchaser, by buying this unit agrees and is aware that this item is sold for offroad or circuit use only.

Thank please note that Ebike batteries are considered hazardous and should never be charged inside the home or un-supervised.

Shark Electric Battery 52v 15 Ah 40A BMS

Samsung Battery 30Q & 2A Charger. UK Stock?

This is the very best of battery technology: 14S5P 52v15Ah (Samsung 30Q) with 2Ah UK charger. 40Amp Nominal BMS designed to fit on down tube utilizing water bottle bolts. Specifically designed for high output discharge. Other inferior cells used in cheaper packs simply cant deliver like these. If you think the cost is high, these batteries have 70 cells that retail in the UK for around £7 each! not including a BMS, casing , charger, shipping taxes AND FABRICATION.

Battery are comprised of many individual cells (18650 cells are the normal form factor), are always a compromise between Ah (storage: how long the motor runs) and output A (Amps: how much power it has to accelerate and cruise). A cheap cell will have low output and low storage (1A and 1400mAh). The high end cells will have a compromise between high storage and output. The very highest output 18650 cells can individually deliver about 25A but only store around 2500mAh. The highest storage cells can only supply around 5A but store 3500mAh. Not all rated outputs are true.

The Panasonic 18650 GA cell is rated at 10A output, but will over heat if made to do this for any extended period of time. It does however have a brilliant storage capacity of 3500 mAh

The Samsung 25r has a massive output of 25A but a low storage of 2500mAh

The Samsung 30Q has a genuine very high 15A output and a genuine very good 3000mAh of storage the best compromise for high output cased batteries.

When setting the BBSHD to its highest draw setting of 30A, we need a cell that is capable of sustaining this. Quite simply we don?t want you returning faulty batteries to us. We save no expense and choose the right cell for the job. For highest output the Samsung 30Q cell is the best compromise between output and storage for the Bafang BBSHD. Matched with double nickle strips and high quality 40 A BMS, this battery is guaranteed to deliver.

Please ALSO note, these are genuine new cells and made up into complete battery specially to order for me at the factory. I simply can?t buy a single battery; I have to agree to a production run of at least 30 batteries. Thanks to Ebay + Paypal fees, the mark up is minimal! Not all down tubes are the same and some slight modification maybe necessary to the mounting plate of the battery. You tube has an abundance of “How To” videos.

(The photo of opened battery is for demonstration use only. Batteries are sealed and opening will void warranty)?Battery (space required, please see photo= 380mm * 120mm * 90mm)

Charging: First time charging is VERY important. Always connect the charger to the battery with the charger powered up from the mains. This will stop a “Connection Spark”.The battery needs a “Balance Charge” on first charge. Please charge as above. The charger will display two red lights (charging) after a long period of time (between 1 and 8 hrs – depending on state) the LED charger lights will display red and green. This indicates an initial charge is complete. However, as this is a new battery, not all cells within the battery are balanced (same state of charge as some were higher/lower than others to start with). This is because cells can arrive at the factory in different batches and may have slightly different charges due to time in storage). This is very common and normal. Now please leave the charger connected to the batteries for a further 12 hrs. This allows the internal balancing system (BMS) to balance out all the internal cells. The charge may turn on and off over this period of time. This “Balance charge does not need to be done every time and is recommended every 20+ charges. Leaving the charger plugged in working does not damage the batteries. The charger is designed to stop charging at a pre-set level and turn on again when this level drops.

* 6 Month Warranty is for manufacturing defaults and does not over miss use or accidental damage. These units are extremely strong and robust and will not let you down unless abused. We undertake warranties here in the UK. We take the pain!

Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.