ASI BAC 800 52V (14S) FOC 2750W (Peak) CYC Controller + Display + 40 + MPH
Higher Volts, Higher RPM Higher Speed !
This is truly plug n play and expect RELIABLE speeds of around 40+ MPH
The fantastic Eggrider is now the default display for this device
This is smoother and more reliable than the std cyc controller at present.
This for the 52V set up.
We can change map to 72v at a later date if sent back to us FOC but your will need to purchase the “Voltage loom”
* UK Warranty
For international orders, please email: [email protected]
Ultimate 52V CYC battery and Controller Screen -complete kit with Eggrider Display and Gear Sensor all included!!
The power delivery is smooth and progress and powerful.
The ASI BAC gives a very refined ride with this massively more advanced FOC controller.
PAS is totally tuneable through the Egrrider display and gives also an accurate range reading and can be tethered to your media phone and Bluetooth app. You can use our phone as live “big Screen” display.
Controller Feature Set
- FOC (Field Oriented Control)
- improved torque throughout the rev range
- Higher RPM compared to the stock controller on 52V and especially on 72V (Up to 7500RPM)
- Silky smooth throttle control and responsiveness, like a fine adjustable knob on a light switch.
- Improved efficiency due to FOC algorithm, premium internal components within the controller (like the mosfets) which increases efficiency while reducing heat losses
- Automatic sensored to sensorless transition which gives you addition 5% top speed and better performance
- Can use Bafang display (Assist Modes are incompatible at the moment, other readouts would work, but you will only have one assist level which max power / speed)
- Supported displays are TFT 72V 750C (has a custom firmware that allows full compatibility with the BAC800 including assist modes, PAS, light, etc) and the Eggrider Display
- Includes 3D Printed Cover
- Usable voltage is 36V-92V
- Lightweight and compact design keeping your handlebar clean
- Small enough to avoid unwanted attention
- Dust and water resistant – IP65 protection
- Voltage reading between 20V up to 60V
- First to detect real battery capacity and tracking stats of up to 3 batteries
- Android and iOS mobile apps for more statistics and configurations
- Providing flexibility to comply with road e-bike laws worldwide
- Ability to use the EggRider app as a larger display
- In-depth charts capability for your rides
- One button switch between two profiles
- Throttle yes/no
- Pedal assist yes/no
- Power level
- Size: 75mm x 47mm x 35mm
- Weight: 31g
- Cable length: 30cm
- Handlebar mounting bracket: standard 22.2mm diameter
- Physical buttons: Power On/Off, Level Up/Down and popular Road/OffRoad mode switch
- Connector: Higo/Julet waterproof 5 pin male/female (see image)
- Bluetooth low energy (BLE)
- Compatible with e-bikes based on Bafang motors (including Sondors), Lishui and Kunteng controllers and many other brands we keep discovering
- Hex bolt: M3
- Mounting clamp pin: 2.0mm diameter and around 15mm length
Help and instructions:
The controller fits neatly between the motor mounting bracket – out of harms way but loads of cooling