52v 20Ah 60A Triangle “Tough” Waterproof Tough ABS Battery with 3A charger
These are now special order and delivery normally with 2 working weeks.
Stay in the power and speed zone longer and faster with 52volts
(nearly all 48V systems can take 52V)
52v 20Ah (14s8p) 60A 112cells on/off switched XT90 connector Ebike, Electric Bike, Triangle Battery with 3A UK Charger
This is the 14s8p Ah battery containing 112 cells, 60A BMS (battery management system) with 3AH UK charger. 60 Amp Nominal BMS. Designed to fit within the triangle using a choice of 9 Velcro fastening points.
These type of cells used in high amp discharge installation where the combination of 10A per cell maximum discharges yet a storage capacity of 2500. They are specially designed for high output discharge. Other inferior cells used in cheaper packs simply cant deliver like these in this scenario. Although these are China branded cells, we stand by them and give a full 1 year warranty. I use one of these batteries day in, day out on my Bafang Ultra drive set at 50A. Im 20 stone and hold the bike constantly at 30 mph with 4.8 heavy Maxxis Minion tyres. I ride all year, rain or shine. Out of all the batteries we sell, this is my choice because of cost with function. Yes I could get more range, or a better known cell,but 20Ah is more than enough and the cells have proved themselves over and over again in form, with a daily 15 mile return ride with loads left over (see the fat bike with the light on: https://www.facebook.com/1377404372307832/photos/a.1423187944396141/1991352987579631/?type=3&theater. These batteries are particularly good for: large rear hub systems of 3000watts, Cyclone mid drive and BBSHD conversions. These cells can supply a nominal 3000 watts (depending on charge state) a nominal and bursts much higher.
These are factory made using the very latest in spot welding and nickel strip.
Please ALSO note, these are genuine cells and made up into complete battery specially to order for me at the factory. We can’t simply buy a single battery; I have to agree to a production run of at least 20 batteries.
The cases are extremely tough and weather resistant to a high degree. They are designed to take a medium impact.
Not all triangles are the same, please use the link below to download and print two A4 pieces of paper that create a life size template.
The battery is 365 mm in length and 235 mm in height. The width is just 80 mm.
Template download (print on A4 Paper and align):
* 12 Month Warranty is for manufacturing defaults and does not over miss use or accidental damage. Opening battery will void any warranty.
Battery must be charged and connected in the “On position”
Please note, Lithium batteries are considered hazardous and due care and attention should be taken. Although these cells are in wide use, and professionally manufactured in a purpose built factory; because of the power of the battery, we strongly recommend that precautions are taken. We do not recommend charging inside the family home and charging should be supervised. We take no responsibility for misuse. These batteries are thoroughly tested (full discharge and charge cycles at the manufacturing stage and also pre-delivery). These are not DIY or amateur built devices.
Please note, the battery now comes with chrome decal as shown in the “On frame ” photos